Ordering your new ENERGY SAVER Premium Vinyl Replacement Window couldn't be easier. We do all the work at the factory to make our window fit your opening. Because we do, you don't have to do the messy work of new siding, new sheetrock, and new trim so often needed with other windows used for "replacement."

Just follow the simple instructions, and refer to the diagrams, for measuring. This is the time when being sure counts the most. Carefully mark down the dimensions in our worksheet and bring this sheet to Universal Windows. We will then order your windows and when they arrive you'll find that we did all the work in the factory to make them fit - so you wouldn't have to at home.

Measuring the window opening
Note: these instructions are for a double-hung window. If your window is a slider, or a casement, measure the widest part of the opening width and opening height. Record the dimensions in the chart, and note that the old window is a casement, slider, awning, etc. Check with your dealer and he'll advise you how to proceed.

WIDTH
Measure the width of the opening from jamb to jamb, behind the trim or stops. Measure 3 places: at top, bottom and middle, and use the smallest dimension.

HEIGHT
Measure the height from the bottom of the sill to the head jamb above the trim, as shown. Measure 3 places: each side and the middle, and use the smallest dimension.